在线咨询
Specification | 10:1 two-component rubber distribution valve |
Body material | Aluminum alloy anodizing, stainless steel |
Form | Suction type |
Use air source | 4-6Kgf/cm |
Operating viscosity | 1-1.000.000cps |
Rubber inlet | 5/16-18 UNC 2A |
Rubber outlet | 7/8-9 UNC 2A |
Gas pipe thread | G1/8 teeth |
Maximum fluid working pressure | 20 Mpa,200 bar |
Low maintenance cost
Easy to clean
Modular design
COPYRIGHT © 2023 Shanghai Shengpu Fluid Equipment Co., Ltd .AL RIGHT RESERVED.